3114-16J2 (PJ)

3114-16J2 (PJ)

Electrical specifications

Spark Industries leads the way in applications for low power, high voltage spark ignition transformers. Each transformer is made to exact customer specifications with multiple case designs and quick connect terminals to choose from. Our transformers are vacuum encapsulated in a heat resistant molded nylon case with high dielectric epoxy resin assuring excellent insulation properties as well as maintaining close lead location tolerances.


#20 AWG tinned based lead, may be trimmed to any length 0.5 or less. Various types of high voltage terminals are available.

Body case

Molded black nylon shell.


Internal connections of windings are such that the first high-voltage output pulse will be negative when a charged capacitor with a positive terminal connected to P1 is discharged into primary.

Secondary open circuit output voltage

Minimum output voltage shall be -16KV, +20KV into a 25 picofarad load when a 1.5MFD capacitor charged to 140KV is discharged through a SCR into the primary.

Primary current

The peak primary current shall be 60 amperes maximum with 1.0 microfarad ! capacitor and 150V input voltage.

Electrical parameters

  • Primary resistance: 32 milliOhms +/- 10%
  • Primary inductance: 5.7 microHenries +/- 10%
  • Secondary resistance: 650 Ohms +/- 10%
  • Secondary inductance: 212 milliHenries +/- 10%
Please fill out this quick form for more information on this part.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.